The Trap Superpack includes a ton of Drums: -29 Claps & Snares, -32 Drum Loops, -25 Hats & Cymbals, -20 Drum Kicks, -33 Percussion Samples. Orchestral One Shots: -29 Horns, Trumpets, & Trombones, -13 Violin Samples. Damn son where d you find this download wav.
Polycom VVX Web Interface - Change Admin Password. Webapps exploit for Hardware platform.
These files are related to polycom web interface default password. Just preview or download the desired file.
Web Configuration Utility User Guide
Every effort has been made to ensure that the information in this manual is accurate. Polycom .. Chapter 1: Getting Started with the Web Configuration Utility.
QT 44011 Registering Standalone Phones.fm
Sep 1, 2010 - The administrator username and password. The factory default web interface username is Polycom (case sensitive) and the default password is ..
Polycom Web Configuration Utility User Guide
Polycom Web Configuration Utility User Guide. Polycom ... Choose your login option either as Admin or User, enter the corresponding password, and click the.
Polycom VVX 500 Admin Guide
Every effort has been made to ensure that the information in this manual is .. The section, Using the Polycom Web Configuration Utility, shows you how to use ..
Polycom VVX 300 & 310 Admin Guide
Every effort has been made to ensure that the information in this manual is accurate. .. Using the Polycom Web Configuration Utility, shows you how to use the ..
Polycom SoundStation IP 6000 Phone User Guide
Every effort has been made to ensure that the information in this manual is accurate. .. Configuring Your Phone Using the Polycom Web Configuration Utility on.
Polycom SoundStation IP 5000 Phone User Guide
Every effort has been made to ensure that the information in this manual is accurate. Polycom .. Configuring Your Phone Using the Polycom Web Configuration.
SoundStationIP 3000 Admin Guide
To use the Manual Configuration mode, .. To open the Web Interface for your .. 1565 Barber Lane, Milpitas CA 95035; www.polycom.com; 1-800-polycom.
With the recent release of UCS 5.0 for Polycom VVX Phones automatic firmware updates are now supported directly from the Lync Device Update service. This is the same functionality which Lync Phone Edition devices have always used for firmware updates and now eliminates the need for a separate provisioning server in most Lync environments leveraging VVX Phones.
Although the 5.0.0 release added the ability to leverage the Device Update service it was not yet possible to actually leverage the feature until a new update was published. Now that the 5.0.1 maintenance release is available then this and all future releases can be handled natively by the Lync server.
The update behavior of the VVX phones is very similar to that of Lync Phone Edition, yet is even more flexible. For LPE devices the update service is queried immediately after the initial registration and then again after a hard-coded period of time. If a new update is available LPE devices will wait for a certain period of inactivity on the phone and then automatically download, waiting again for more idle time before rebooting itself to complete the process. VVX devices operate in the same way but also offer two important improvements: (1) the inactivity timeout is configurable and (2) when a new update is available the device will prompt the user to install it immediately if desired, or defer if not. In LPE it is not possible to control the update behavior in this manner and it is all automatic.
Note that this article is quite lengthy as the entire process is described in detail, accompanied by various log entries and other examples. Yet in practice using the Lync Device Update service for VVX phone updates is identical to the process used by LPE devices. So when working with a Lync Server already setup for LPE updates then adding VVX updates is as simple as importing and approving the new packages. The experienced Lync administrator can skip to the last section entitled “Lync Pro Guide” for the abbreviated steps.
Firmware Versions
The following table lists Lync-qualified UCS releases which support native device updates and will continue to be updated as future releases are posted online, including links to both Release Notes and the software packages. The .cab format links are the correct firmware packages for using with the Lync Device Update Service, but the traditional package format (.ld) for use with a basic provisioning server is also included for convenience.
Additional releases in the same version will typically include an letter revision code (e.g. Rev B) to indicate a newer version, in addition to the last four digits being incremented. As these letter codes come from engineering pre-release builds then whichever package makes it to general availability is the code that is used, so that is why they simply aren’t contiguous (e.g. A, B, C) and will often jump to a ‘D’ or ‘P’.
Additional details on features provided in new releases are located at the end of this article. How to download audiobooks on iphone.
Preparation
In order to successfully download the UCS firmware package from the Lync Server to a VVX phone the device must first be running at least version 5.0.0.6874 which was the first officially released version to support the Lync Device Update service. The phone must also be successfully registered to a Lync Server in order for this capability to function.
The example used in the remainder of this article is a Polycom VVX 410 phone running 5.0.0.6874 firmware, registered externally via an Edge Server to a Lync Server 2013 environment.
The following preparation steps do not need to be performed on any devices but are included to illustrate key behavior in the process as well as verify a functional device update service.
As this example environment does not yet have any device update packages for VVX phones imported into the Lync Server then the phone should report that there is currently no update available.
If there were any problems connecting to the device update service on the Lync Server (internally or externally) then this status window would report a connection failure. To further validate that this device was successfully connected to the update service the server’s device log can be checked for any entries associated with the device.
10/16/2013 08:57:48,,192.168.1.153,3PIP,10/16/2013 9:57:46 AM,'0004F2810E93', '0004F2810E93','POLYCOM','VVX410','Rev-2','ENU',cpe.nbt;5.0.0.6874;8/22/2013 2:56:00 AM,
The entry above shows that the device queried the update service but the server does not have any newer updates currently approved, thus no download information was passed to the device. Also note the revision that was reported in the entry (e.g. Rev-2) as that information is important when approving any pending updates.
Import Updates
This part is nearly identical to how Lync Phone Edition updates are imported and approved in Lync Server, as documented in this previous article. The only differences are how the updates are packaged and where they are stored on the server.
Prepare Restore Version
As important as upgrading the firmware is, having a way to reverse the update is just as imperative. It is always possible that a new firmware version does not operate as expected in some environments so if an issue is discovered soon after upgrading to a new version then being able to roll-back the devices to the previous release is critical.
Existing phones would have been updated to the 5.0.0 release using some means other than device update service so if the 5.0.0 version is not loaded into the Lync Server prior to approving the 5.0.1 version then it will not be possible to roll-back firmware by using the Restore feature. Instead the older updates would need to be manually imported and approved using this same process.
Import-CsDeviceUpdate -Identity service:webserver:lync.schertz.name -FileName C:TempPLCM_Update_VVX410.cab
Upon successful completion of the cmdlet the firmware files contained within will have been automatically copied by the server into various directories in the Lync Server share. The parent folder (DeviceUpdateStore) is the same as where other device updates are stored, but instead of being placed under the UCPhone subdirectory these packages as well as device updates from other qualified devices like Snom are stored under the 3PIP sub-directory. (‘3PIP’ is an acronym for Microsoft’s 3rd Party Interoperability Program for qualified Lync phones).
LyncShare1-WebServices-1DeviceUpdateStore3PIPPOLYCOMVVX410Rev-2ENU5.0.0.6874CPE
Although the package is now installed on the Lync Server it is not yet available for applicable devices to utilize. A quick check of the device updates status on the phone at this point would show that there is still no available update.
It is important to understand what the three version fields represent in the device update configuration. The Pending Version is the version of files which were last imported into the server using the Import-CsDeviceUpdate cmdlet. That cmdlet basically puts the software into a staging area which does nothing until an administrator either approves or cancels the pending update. The Approved Version is exactly as it sounds: the version of software which the administrator has most recently approved for a given device mode. The Restore Version is initially blank and will be populated when this process is performed again with another newer update. When approving a newer update the previously approved version will be moved to the Restore Version field which can then be used to easily roll-back devices to that older version.
If the approved version is the same version that the device already has installed then the device update service will not pass any download URL or new version details to the phone when it queries the service. Thus the status on the phone will still display no available updates.
Prepare New Version
Now that the initial version is configured and approved it is ready to be moved into the Restore Version field by approving another version. Note that Lync Server allows either newer or older versions to be approved, so this process can be used to either upgrade or downgrade devices depending on the need to do so.
The same exact steps are repeated again, but this time the newer firmware package is imported and approved which will automatically move the previous Approved version into the Restore version field.
Import-CsDeviceUpdate -Identity service:webserver:lync.schertz.name -FileName C:TempPLCM_Update_VVX410.cab
Test Device
Now that a newer version has been imported and is in a pending state it can be used with a test device, yet all other devices would not be able to get the newer version as it has not yet been approved. It is always recommended to install a new firmware release on a handful of test devices to make sure there are no immediate negative impacts to the devices in the environment before approving the version for mass deployment.
Tip: Polycom UCS devices support various Multi-Key Combinations (MKC) of which can be used to quickly perform actions or access menus otherwise buried a few levels deep. Previous articles have covered the MKC which is used to quickly access the Base Profile menu (1 4 9). Two more helpful MKCs are available to instantly trigger either a reboot or a restart of the phone. Note that these MKCs can vary between different UCS device families like VVX, SoundPoint IP, SoundStation IP, etc.
Simply press and hold the three buttons of the desired MKC together at any menu or screen on the phone and after 2 seconds the associated action will be triggered.
Restarting (or rebooting) the device will force the phone to immediately query the Lync Device Update Server after registration so that there is no need to wait for the phone to query the device update service on its own schedule. After the restart completes and the phone registers to Lync then the following alert message should appear on the home screen.
Viewing the device update server log again will show the latest query from the device, but this time it will include the internal and external device update services URLs with the absolute paths to request the firmware package specific to the device model/revision.
10/16/2013 12:24:20,,192.168.1.153,3PIP,10/16/2013 1:24:18 PM,'0004F2810E93','0004F2810E93','POLYCOM','VVX410','Rev-2','ENU',cpe.nbt;5.0.0.6874;8/22/2013 2:56:00 AM, http://lync.schertz.name/RequestHandler/Files/3PIP/POLYCOM/VVX410/Rev-2/ENU/5.0.1.4068/CPE/CPE.nbt; https://lyncweb.mslync.net/RequestHandlerExt/Files/3PIP/POLYCOM/VVX410/Rev-2/ENU/5.0.1.4068/CPE/CPE.nbt;5.0.1.4068;10/10/2013 4:35:06 PM
If the previous alert message has disappeared from the phone’s screen before an action is taken it can be accessed again by pressing the More button on the home screen to cycles through the additional soft key options to locate the Dev Updt menu.
At this point a choice can be made whether to immediately install the new update or instead wait for the phone to perform the action on its own. If the phone is left idle for 15 minutes (900 seconds) then it will automatically reboot, download the update, and then apply it. If the Reboot option is selected from this menu then the phone will immediately begin the update process.
The firmware packages for VVX phones contain two parts: the BootROM files called the ‘Updater’ and the actual phone operating system and programs called the ‘Application’. The update process downloads and installs these parts individually with reboots in between each.
The device will reboot and then display a status of ‘Updating’ shortly afterward. It will download the new Updater and reboot again. After the second reboot the same ‘Updating’ message will appear again, this time followed by a status of ‘Downloading new application’. After the application data is downloaded it will be extracted and installed into the device. A third and final reboot will be triggered and then the phone will return to its normal status, signing back into the Lync Server.
C:inetpublogsLogFilesW3SVC<SiteID>
2013-10-16 18:45:27 10.22.1.31 GET /RequestHandlerExt/Files/3PIP/POLYCOM/VVX410/Rev-2/ENU/5.0.1.4068/CPE/CPE.nbt – 4443 – 10.24.5.13 FileTransport+PolycomVVX-VVX_410-UA/5.0.0.6874+Type/Application – 401 1 2148074254 4
2013-10-16 18:45:27 10.22.1.31 GET /RequestHandlerExt/Files/3PIP/POLYCOM/VVX410/Rev-2/ENU/5.0.1.4068/CPE/CPE.nbt – 4443 [email protected] 10.24.1.13 FileTransport+PolycomVVX-VVX_410-UA/5.0.0.6874+Type/Application – 200 0 995 293
Approve Updates
Once sufficient testing has been performed then it is time to approve this new version for all desired devices, models, and hardware revisions.
In this example any VVX 410 models connected to this Lync Server will be able to upgrade to version 5.0.1.4068 and in the event it is desired to roll-back the restore version of 5.0.0.6874 is available. All approved devices will begin to automatically update given the behavior previously explained. Based on the default behavior all online phones will have checked-in with the Device Update service within 2 hours and any device left idle for at least 15 minutes will trigger the upgrade process.
Downgrade Device
The following steps outline how to test downgrading devices using the Restore version assigned in the Lync Device Update configuration.
Polycom Phone Configuration And Setup
Additional Parameters
As mentioned earlier, some of the behavior in the device update process can be controlled by the administrator.
Because the following parameters are specific to controlling behavior in UCS then there is no way to utilize the Lync Server to provide these settings in-band. A separate provisioning server would still be needed to manage a quantity of devices in this manner.
For example, to disable the Lync Device Update capability on the devices import the following sample configuration file into the phone. In order to modify any individual device parameters it is required that the device.set and device.<parameterName>.set parameters are set to ‘1’ at the same time, otherwise the phone will ignore the configuration change.
<?xml version='1.0' encoding='utf-8'?>
< Lync device.set='1' device.prov.lyncDeviceUpdateEnabled.set='1' device.prov.lyncDeviceUpdateEnabled='0' />
Another scenario would be to leave the device update feature enabled but modify each of the behavioral parameters. The following example shows how to increase the inactivity timeout to 30 minutes, disable the pop-up alert when a new update is available, and increase the server poll interval to 8 hours.
<?xml version='1.0' encoding='utf-8'?>
< Lync lync.deviceUpdate.userInactivityTimeout='1800' lync.deviceUpdate.popUpSK.enabled='0' lync.deviceUpdate.serverPollInterval='28800' /> Lync Pro Guide
As promised here is the short-form set of instructions for importing all VVX firmware images from a new update package into a Lync Server and then immediately approving them. This section can also serve as a quick reference guide every time a new update package is released.
Polycom Web Configuration Utility Download
Get-CsDeviceUpdateRule | Where-Object {$_.Model -like 'VVX*'} | Approve-CsDeviceUpdateRule
New Features
This section will include details on various features added throughout new updates.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |